What You Should Know About Roofing Systems

The word “Roof” or “Roofing Systems” as used in this article means a sloped cover to a building, made of any material, and we do not mean a flat concrete slab that can be used by humans.

Let’s start with a well-kept secret, one that will give you an instant understanding over the range of roof solutions:

“The slope of the roof is a clear indicator of how hi-tech the roof is. A very low slope will mean a hi-tech roof, and a high slope a low-tech roof.”

To understand this principle, let us start with one of the most low-tech roofing systems: a thatch roof.  Thatch roofs in most countries will have a slope of 45 degrees or so.  This is because they are not very water-tight. However, they are rather thick, most often 400mm (16″) or so.  So the high slope forces the water to run off before it penetrates through the thickness of the thatch, a low-tech solution.

On the other hand, a state of the art system such as low-slope “kliplock” corrugated metal sheeting can be installed at slopes of 1 degree or less, as it is perfectly watertight.

Apart from being watertight, a roof must perform other functions: it must look attractive, must have a permanent abrasion-resistant finish, must not absorb heat in hot climates, and must not lose heat in cold climates.

A roof must be able to withstand the following loads:

• Wind loads, which can be very large in some areas
• Human loads (if the roof is not accessible, it must be able to withstand the weight of maintenance workers)
• Snow loads
• Earthquake

For a number of reasons, the image of a building with a sloped roof has very strong roots in the human psyche – you will even find this on your browser, to denote a “home” page.

TYPES OF ROOFING SYSTEM

1. Thatch Roofs

These are one of the earliest roofing systems created by man, and are still used in millions of structures worldwide.  Made of dried plant stems, a thatch roof will commonly have a slope of 45 degrees and thickness of 400mm (16″). This thickness is made up of a number of layers of individual plant fibres. When water falls on a thatch roof, it will trickle from layer to layer as gravity pulls it downwards.  So the thickness actually creates sufficient layers for the water drops to move horizontally out of the structure before they fall into a room.  The steep slope serves to increase the speed of the drops, so that they quickly move out of the structure before falling inside.  So this kind of roof is very different from other roofs, as it does not have a waterproof skin

2. Slate or Stone Roofs

Stone is not the greatest material for roofs, as it is heavy.  Slate is a naturally occurring type of stone that splits into thin layers if you hit it with a chisel in just the right way.  This produces thin, waterproof tiles that can be overlapped to form a roof.  Since the stone tiles are not exactly the same size and thickness, this is not a system that is highly waterproof.  Therefore it needs to have a good slope, of say 20 to 30 degrees, to force the water to run off the roof and not trickle through the gaps.

3. Wood Shingle Roofs

Wooden shingles are light and easily replaceable, and were used extensively in many parts of the world.

4. Metal Roofing Systems

Metal roofing systems are hugely popular in today’s times. They are used in almost every industrial and airport terminal building and can also be used in residential and educational buildings. They make for an extremely light, strong, economical, and waterproof roof, and come in a very wide range of varieties. Commonly used metals are mild steel, aluminum, and stainless steel. Steel roofing sheets need to be protected from corrosion, and are usually galvanized or coated with other protective layers. The sheets are quite thin, as much as 0.5 mm in the case of steel, and 1 mm in aluminum. They therefore require insulation and other layers to be incorporated into the roof.

So, that is the much you should know about roof systems. Now you roofs are not just coverings over a house, they do a lot more.